Multi-Station Prep Station

Description

This multi-station prep station focus on dealing with sanding dust and other debris generated from production. It can also guarantee safe production. The China preparation station has recycle system with pulse filter, takes small location, has high recycle efficiency and easy to clean.


Features

1. Multi-station prep station can improve working efficiency and it is time saving. It can repair many cars at the same time.
2. Independent structure and its recycle adopt integrated combination design. It has the characters of compact design and small locations.
3. Multi-station prep station can meet different needs of the repair.
4. The recycle system of China preparation station has short distance, so there is no need to worry about cleaning pipes. It also reduces recycling pressure loss.
5. Its main functions are remove dust and waste air from maintenance workshop and polishing workshop to make sure the cleanness of working environment and improve maintenance quality.
6. The following spare parts of China preparation station are optional: infrared lamp, heating system; basement, recovery system, Siemens motor and Siemens electric components.



Parameters of Multi-Station Prep Station

Outside Dimension 7550×3550×3100mm(L×W×H)
Inside Dimension 6300×3450×2650mm(L×W×H)
Plenum Dimension 6300×3450×450mm(L×W×H)
Basement No basement, 2 rows of pits for exhausting
Room Body Back side with 50mm EPS wallboard, the other 3 sides with PVC curtains
Light System Ceiling lights 8units×4pcs=32pcs×36W, with electronic ballasts
Generator Cabinet Exhaust from rear side; square steel frame, galvanized steel cover
Intake and Exhaust System 1 unit 5.5KW double intake centrifugal fan, model YDW-4.5S, air capacity: 15500 m 3/h, electric damper for exhausting
Purification System Pre-filter, high efficiency filter, exhaust fiberglass filter
Roof Galvanized steel plates
Control System Fan operation switch, lighting switch, emergency stop
Install Way Suspending steel hook from roof of building or steel column supporting
Total Power 6.7KW
Related Products
  • 4 Wheel Scissor Car Lift BY-270
  • 4 Wheel Scissor Car Lift BY-270Our full rise scissor car lift is designed to maximize your available floor space and give you more room to move around transmission jacks, oil drains and other shop equipment. You can use our
  • 4 Wheel Scissor Car Lift BY-350D
  • 4 Wheel Scissor Car Lift BY-350DThe execution part of four wheel alignment scissor car lift adopts stacked bar form and power-driven mechanical transmission structure. The China portable scissor car lift is widely used for the
  • 4 Wheel Scissor Car Lift BY-300B
  • 4 Wheel Scissor Car Lift BY-300BA, The hydraulic auto scissor car lift is applicable to lifting, detecting, repair and maintenance of various cars and small vehicles. B, Flush-mount design of China car lift takes fewer places. C,
  • 4 Wheel Scissor Car Lift BY-280
  • 4 Wheel Scissor Car Lift BY-280Wheel alignment scissor car lift is a heavy-duty design. It has low pressure control box with up, down and stop buttons. It is equipped with safety device under the platform which can make sure the