Export Spray Booth

Description

The air flow of car painting spray booth is from the top to the bottom. This machine is convenient and has better working environment. The balanced indoor temperature makes perfect painting effect. The car mobile spray booth intakes air from back upper and exhaust air from back upper. It is equipped with aluminum alloy frame, white coated steel outside, galvanized steel inside and heat preservation material inside.

Features of Car Painting Spray Booth

1. 0.476mm color steel with rock wool inside for wall panel
2. turbo fan, with air capacity of 25000m³/h
3. Pneumatic damper for spraying baking cycle
4. All panels of car mobile spray booth have tongue and groove interlock structure.
5. Industry-leading light levels
6. The car painting spray booth has specific and dual voltage 58-watt light fixtures.
7. The booths include installation instructions, fan, motor & drive, fasteners, hardware, and sealant necessary for assembly
8. Control panel and other electric components of car mobile spray booth can be purchased separately
9. The following spare parts are optional: heat recovery system, Siemens motor, PLC control system, Siemens electric component, PU panel and LED lights.

Parameters of Car Painting Spray Booth

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×5450×3400mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
Emergency door	1 units, 800×2000mm (W×H), colour: white.
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, adjustable type, full grilles made by flat bar and twisted steel, galvanized, 3 ramps, 900×2000mm/pc, silver colour.
Wall panel	Thickness: 50mm, :1150mm, tongue and groove structure, 0.476mm colour steel with rock wool inside, colour: white, bulge structure.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×58W, side lights: 11Units×4Pcs=44Pcs×18W, with electronic ballasts, lighting boxes are powered coated, illumination ≥1500LUX
Generator cabinet	Intake from back upper, exhaust from rear upper, aluminum alloy frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h.
	Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 5m ducts, 1 pcs 900 bend, 1 pcs 300 bend, 1 pcs intake hoop.
Heating system	RIELLO RG5S diesel burner, double layer stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 260000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.
Purification system	Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type)
Roof	Galvanized steel
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, hour meter, temperature limit controller, pressure gauge, all motors is normal start.
Total power	18.5KW (Power supply 1×220V, 3×380V, 50HZ)
Unit price	USD/set FOB Guangzhou